Nastec VASCO Inverters
Nastec VASCO specialise in cost-effective inverters and variable speed drives - VASCO - VAriable Speed COntroller is a purpose-built family of variable frequency drives, designed to control and protect pumping systems based on changing pump speed. From water supply for domestic, irrigation, commercial and industrial applications, to heating and air conditioning, from filtering to pressure washing, the range perfectly fits any new or existing application. From water supply for domestic, irrigation, commercial and industrial applications, to heating and air conditioning, from filtering to pressure washing, the range perfectly fits any new or existing application ensuring:
VASCO - VAriable Speed COntroller is a purpose-built family of variable frequency drives, designed to control and protect pumping systems.
MIDA - Next generation of motor on-board inverter.
Simplified installation Energy and cost-saving Longevity of the pumping system Greater reliability Protection against overload and dry running IP55 Protection Wall or Motor Installation Kits
Installing VASCO – VAriable Speed COntroller is simple and intuitive, requiring just a few quick stepsConnect device to the power supply. Connect device to the pump. Connect device to the sensor, located wherever in the piping you want to maintain the desired constant physical dimension (pressure, flow, liquid temperature, etc.) Set device to configure the pump to the system and the desired performance.
When first powering the device, a quick initial wizard is required for complete configuration of the drive. Additional parameters can be configured later by entering three different setting levels: End user level. The only level which can be accessed without a password. It allows the user to monitor electrical and hydraulic parameters and the status of device and pump. Installer level. In this level the installer can configure pump system to the characteristics of the hydraulic system. A password is required. Advanced level. This level allows the electrical configuration of device according to the pump. Another password is required.
The device can be installed directly on the motor with a supplied installation kit.
Motor kit
It is cooled by the motor cooling fan. Motor kit consists of 4 special clamps (or flange adapter) to secure the device to the motor fan cover (or motor feet).
The device can be installed directly to the wall with a supplied installation kit.
Wall kit
It is cooled by an external cooling fan attached to the inverter radiator. A special metal bracket is supplied for device to be mounted on the wall.
VASCO - VAriable Speed COntroller is a purpose-built family of variable frequency drives, designed to control and protect pumping systems.
MIDA - Next generation of motor on-board inverter.
Installing VASCO – VAriable Speed COntroller is simple and intuitive, requiring just a few quick steps
When first powering the device, a quick initial wizard is required for complete configuration of the drive. Additional parameters can be configured later by entering three different setting levels:
The device can be installed directly on the motor with a supplied installation kit.
Motor kit
It is cooled by the motor cooling fan. Motor kit consists of 4 special clamps (or flange adapter) to secure the device to the motor fan cover (or motor feet).
The device can be installed directly to the wall with a supplied installation kit.
Wall kit
It is cooled by an external cooling fan attached to the inverter radiator. A special metal bracket is supplied for device to be mounted on the wall.
