Flamco Flexfiller 180D Pressurisation Unit

Compact and totally enclosed digital pressurisation units with electronic pressure transducer and user-friendly microprocessor for use on sealed system in order to provide a minimum system pressure requirement.

The Flexfiller is a floor standing, flow rate (up to 18 l/min) top-up pressurisation unit with 18 litre internal break tank. Ideal for Industrial, commercial or large domestic applications. Available in single or twin pump configuration.

Application:

• Commercial, Industrial and Residential

System Volume (Guide): < 300,000 litres.

Product Features:
For system volumes up to 300,000 litres.

• Fluid Protection Category 5 (AB Weir Overflow).
• System fill mode.
• Onscreen Service Reminder - 12 Months.
• Electric pump, 230V 50Hz 1ph (2160D: 415V 50Hz 3ph).
• Colour: Black (RAL 9005).MODBUS RTU Communication Protocol.
• Password protected.
• Sequential programming menu.
• Pressure setting in 0.1 bar increments.Pump pulse option.
• Flood Protection (Pump Runtime Limiter, Excessive Start Alarm).
• Event logging: Alarm activations, Pump Run counter (activations per pump), Cumulative run timer (hours per pump), Electrical interuption.
• Volt free contacts: Common Alarm (N/C), High Pressure Alarm (N/O), Low Pressure Alarm (N/O), Sensor Health (N/O), Pump 1 Health (N/O), Pump 2 Health (N/O).
  
  

  Type

  Dimensions

  A [mm]

  B [mm]

  C [mm]

  D [mm]

  E [mm]

  F [mm]

  H [mm]

  K [mm]

  M [mm]

  Flexfiller 125D - 280D

  330

  480

  760

  500

  150

  800

  220

  520

  580

  Flexfiller 2160D

  660

  470

  1090

  500

  150

  800

  370

  690

  740