Flamco Flexfiller 150D Pressurisation Unit

Compact and totally enclosed digital pressurisation units with electronic pressure transducer and user-friendly microprocessor for use on sealed system in order to provide a minimum system pressure requirement.

The Flexfiller is a floor standing, flow rate (up to 18 l/min) top-up pressurisation unit with 18 litre internal break tank. Ideal for Industrial, commercial or large domestic applications. Available in single or twin pump configuration.

Application:

• Commercial, Industrial and Residential

System Volume (Guide): < 300,000 litres.

Product Features:
For system volumes up to 300,000 litres.

• Fluid Protection Category 5 (AB Weir Overflow).
• System fill mode.
• Onscreen Service Reminder - 12 Months.
• Electric pump, 230V 50Hz 1ph (2160D: 415V 50Hz 3ph).
• Colour: Black (RAL 9005).MODBUS RTU Communication Protocol.
• Password protected.
• Sequential programming menu.
• Pressure setting in 0.1 bar increments.Pump pulse option.
• Flood Protection (Pump Runtime Limiter, Excessive Start Alarm).
• Event logging: Alarm activations, Pump Run counter (activations per pump), Cumulative run timer (hours per pump), Electrical interuption.
• Volt free contacts: Common Alarm (N/C), High Pressure Alarm (N/O), Low Pressure Alarm (N/O), Sensor Health (N/O), Pump 1 Health (N/O), Pump 2 Health (N/O).
  
  

  Type	Dimensions
  A [mm]	B [mm]	C [mm]	D [mm]	E [mm]	F [mm]	H [mm]	K [mm]	M [mm]
  Flexfiller 125D - 280D	330	480	760	500	150	800	220	520	580
  Flexfiller 2160D	660	470	1090	500	150	800	370	690	740