Flamco Digifiller 1.0 Pressurisation Unit

Compact and totally enclosed digital pressurisation units with electronic pressure transducer and user-friendly microprocessor for use on sealed system in order to provide a minimum system pressure requirement.

The Digifiller is a wall mounted, flow rate (up to 12 l/min) top-up pressurisation unit with 4 litre internal break tank. Self venting pumps and preset options to remove the need for conventional commissioning of the Pressurisation Unit. Ideal for Industrial, commercial or large domestic applications. Available preset to 0.5 bar, 1.0 bar, 1.5 bar or 2.0 bar topup (Delivery) pressure.

Application:
Commercial, Industrial and Residential.
System Volume (Guide): < 50,000 litres.

Product Features:

• For system volumes up to 50,000 litres.
• Fluid Protection Category 5 (AB Weir Overflow).
• Pre-commissioned.
• Pre-set (Bar).
• Plug & play, but easily adjustable on site if required.
• Self-bleed pump.System fill mode.
• Onscreen Service Reminder - 12 Months.
• Electric pump, 230V 50Hz 1ph.
• Colour: White (RAL 9003).
• MODBUS RTU Communication Protocol.
• Password protected.Sequential programming menu.
• Pressure setting in 0.1 bar increments.
• Pump pulse option.
• Flood Protection (Pump Runtime Limiter, Excessive Start Alarm).
• Event logging: Alarm activations, Pump Run counter (activations per pump), Cumulative run timer (hours per pump), Electrical interuption.
• Volt free contacts: Common Alarm (N/C), High Pressure Alarm (N/O), Low Pressure Alarm (N/O), Sensor Health (N/O), Pump 1 Health (N/O), Pump 2 Health (N/O).